Description What’s special about this bench vise: 4 point swivel base designed to match up with holes on most common welding tables If you have a table with 16 mm holes, and the spacing is on 50 mm centers this vise will fit. Quickly bolt and unbolt the vise anywhere on the table as needed. When mounted in the correct orientation, the back jaw will hang over the edge of the table, allowing you to clamp tall objects in the vise. Mounting Use your own bolts to mount this vise to a work table or other workbench, or you can also purchase the vise with our 16 mm diameter shoulder bolts for bolting to welding tables. A Ball Lock Bolt option is also available. Other Great Features: This vise is made from forged steel rather than cast iron, which has a higher yield strength for a comparable size. The 90,000 PSI tensile strength of these forgings allow the vise to be lightweight but with a comparable strength to vises with twice the weight. Since it’s welded together, if you ever take things a little too far with a cheater bar you can repair it relatively easily Black Oxide finish on the jaws and other hardware Replaceable flat jaws and pipe jaws Adjustable, machined guide rail ensures smooth action 360 Degree Swiveling Base 4 Mounting Holes with 100 x 150 mm center for mounting on welding tables. Holes are 16 mm in diameter. Large machined anvil surface on the rear. Hammer tone blue powder coat Made in Taiwan
